Danline International Ltd
Products
Home page
Feedback / Contact
 Industrial & Technical Brushes

Wide Faced Wheel Brushes

Wide Faced brushes are produced with side plates as an integral part of their construction. Designed for heavy brushing applications, they are suitable for burr removal, descaling etc. They can be used on bench grinders. Wire fill materials are usually Steel, Stainless Steel, Brass or Phosphor Bronze.

Brush Options Special Options
Diameter Face Bore Sideplate
A B C D
  MIN MAX MIN MAX   S/Plate Bore
mm ins mm ins mm ins mm ins mm ins mm ins  mm  
75 3 16 5/8 75 3  9.5 3/8 12.7 1/2 51 2 44/63 -
100 4 16 5/8 75 3  12.7 1/2 36 - 51 2  63/75 1/2-3/4 Solid
125 5 16 5/8 100 4  12.7 1/2 51 2 82 3 1/4  -  
150 6 16 5/8 100 4  12.7 1/2 51 2 100 4  54  
178 7 16 5/8 100 4  12.7 1/2 51 2 100 4  127  
200 8 16 5/8 114 4 1/2  12.7 1/2 51 2 127 5  100  
250 10 25 1 114 4 1/2  12.7 1/2 51 2 127 5 170  
300 12 25 1 114 4 1/2  12.7 1/2 51 2 170 6 3/4 127  
350 14 25 1 114 4 1/2  12.7 1/2 51 2 170 6 3/4 200  
 

Available options and part codes.

Dimensions Steel Wire Stainless Steel Brass MSFS
A C  
mm mm ins 28g 30g 33g 29g 33g 33g RPM
75 (3”)        
75 16 5/8 WF3006 F WF3006 H WF3006 J WF3006 V WF3006 W WF3006 Q 8000
75 25 1  WF3010 F  WF3010 H  WF3010 J  WF3010 V  WF3010 W  WF3010 Q 8000
100 (4”)        
100 16 5/8  WF4006 F  WF4006 H  WF4006 J  WF4006 V  WF4006 W  WF4006 Q 8000
100 25 1 WF4010 F WF4010 H WF4010 J WF4010 V WF4010 W WF4010 Q 8000
100 38 1 1/2  WF4015 F  WF4015 H  WF4015 J  WF4015 V  WF4015 W  WF4015 Q 8000
125 (5”)        
125 16 5/8 WF5006 F WF5006 H WF5006 J WF5006 V WF5006 W WF5006 Q 6000
125 25 1  WF5010 F  WF5010 H  WF5010 J  WF5010 V  WF5010 W  WF5010 Q 6000
150 (6”)        
150 16 5/8 WF6006 F WF6006 H WF6006 J WF6006 V WF6006 W WF6006 Q 6000
150 25 1 WF6010 F WF6010 H WF6010 J WF6010 V WF6010 W WF6010 Q 6000
150 38 1 1/2 WF6015 F WF6015 H WF6015 J WF6015 V WF6015 W WF6015 Q 6000
200 (8”)        
200 16 5/8 WF8006 F WF8006 H WF8006 J WF8006 V WF8006 W WF8006 Q 4500
200 25 1 WF8010 F WF8010 H WF8010 J WF8010 V WF8010 W WF8010 Q 4500
250 (10”)        
250 25 1 WF1010 F WF1010 H WF1010 J WF1010 V WF1010 W WF1010 Q 3500
250 38 1 1/2 WF1010 F WF1010 H WF1010 J WF1010 V WF1010 W WF1010 Q 3500

 

Copyright © 2001. Danline International Ltd