Danline International Ltd
Products
Home page
Feedback / Contact
 Industrial & Technical Brushes

Refill Section Brushes

Refill sections provide a versatile brushing tool for deburring, rust and scale removal, matt finishing, sheetmetal cleaning, flash removal etc. Various face widths can be achieved by adding the required number of sections onto your shaft.

NB: If used singly, side clamping plates must be used.

Brush Options
Diameter Face Bore Sideplate
A B C D
    MIN MAX  
mm ins mm ins mm ins mm ins mm ins
65 2" 1/2 6 1/4 9.5 3/8 12.7 1/2 41 1" 5/8
75 3 6 1/4 9.5 3/8 12.7 1/2 41 1" 5/8
100 4 9 3/8 9.5 3/8 12.7 1/2 41 1" 5/8
150 6 13 1/2 12.7 1/2 51 2 95 3" 3/4
200 8 13 1/2 12.7 1/2 70 2" 3/4 114 4" 1/2
250 10 16 5/8 12.7 1/2 98 3" 5/8 168 6" 5/8
 

Available options and part codes.

Dimensions Steel Wire Stainless Steel Brass MSFS
A C  
mm mm ins 28g 30g 33g 29g 33g 33g RPM

65 (2 1/2”)

        
65 12.7 1/2   RF0200H 127 RF0250J 127 RF0250V 127 RF0250W 127 RF0250Q 127 6000
75 (3”)        
75 9.5 3/8   RF0300H 095 RF0300J 095 RF0300V 095 RF0300W 095 RF0300Q 095 6000
75 12.7 1/2   RF0300H 127 RF0300J 127 RF0300V 127 RF0300W 127 RF0300Q 127 6000
100 (4”)        
100 9.5 3/8   RF0400H 095 RF0400J 095 RF0400V 095 RF0400W 095 RF0400Q 095 5000
100 12.7 1/2   RF0400H 127 RF0400J 127 RF0400V 127 RF0400W 127 RF0400Q 127 5000
125 (5”)        
125 12.7 1/2   RF0500H 127 RF0500J 127 RF0500V 127 RF0500W 127 RF0500Q 127 5000
150 (6”)        
150 12.7 1/2 RF0600F 127 RF0600H 127 RF0600J 127 RF0600V 127 RF0600W 127 RF0600Q 127 5000
150 16 5/8 RF0600F 160 RF0600H 160 RF0600J 160 RF0600V 160 RF0600W 160 RF0600Q 160 5000
150 19 3/4 RF0600F 190 RF0600H 190   RF0600V 190     5000

175 (7”)

        
175 12.7 1/2 RF0700F 127 RF0700H 127   RF0700V 127     4500
200 (8”)        
200 12.7 1/2 RF0800F 127 RF0800H 127 RF0800J 127 RF0800V 127     4500
250 (10”)        
250 12.7 1/2 RF1000F 127 RF1000H 127   RF1000V 127     4500
250 12.7 1/2 RF1000FD           4500

 

Copyright © 2001. Danline International Ltd