|
Industrial & Technical Brushes
Problem Solving
1. Too long to obtain required effect.
| Possible Solution |
|
| Increase surface speed by: |
a. Increasing brush diameter |
|
b. Increasing the rotation speed up to the safe maximum |
| OR |
|
| Apply a 'stiffer' brush of: |
a. Shorter trim length |
|
b. Heavier gauge wire fill |
|
c. Greater density of wire fill |
NEVER INCREASE PRESSURE APPLIED
2. Finer surface finish required.
| Possible Solution |
|
| Reduce hardness of brush by using: |
a. Finer wire fill material |
|
b. Longer trim length |
|
c. Reduce working pressure |
3. Brush material breaks in use:
| Possible Solution |
|
| a. Reduce working pressure |
|
| b. Reduce trim length |
|
| c. Use finer wire fill material |
|
4. Brush wears down too quickly:
| Possible Solution |
|
| a. Reduce working pressure |
|
| b. Use stronger fill material |
|
| c. Increase brush fill density |
|
5. Brush effect not uniform:
| Possible Solution |
| a. Fix workpiece securely to ensure steady application of the brush |
| b. Maintain surface speed within safety limits |
|
|
